Quantcast
Channel: LucyRavenscar - Crochet Creatures
Viewing all 126 articles
Browse latest View live

Accidental Hexagon Blanket

$
0
0


Way back in July 2017 I was ordering some yarn online to make amigurumis, buying a selection of colours from the yarns I favour, Sirdar Hayfield Bonus DK and Robin DK. I was looking for any other brands that might work well to crochet toys, and so I also ordered some Scheepjes Colour Crafter to try it out.

When it arrived, it looked very nice, but unfortunately it was much thinner than the brands I normally use. This difference in thickness may not show up when you're making a garment or a blanket, but when you work in the round it's obvious, as you can see in this photo - the shape on the left is made with Sirdar Hayfield Bonus DK, the one on the right is Scheepjes Colour Crafter.


So, I had eleven balls of yarn that I couldn't use to make amigurumi. Luckily, all the colours I had chosen were various shades of green and brown with an autumnal look, so I decided to use them to make a blanket. Given that it was summer when I started doing this, I thought it would be best to make motifs that I could sew together at the end (preferably in the winter) so I wouldn't get too hot working under an ever-growing blanket. It would also give me a project to work on in-between patterns that I was designing - I get quite agitated if I don't have some crochet to work on in an evening watching the TV!

I chose to make hexagons, using a slightly tweaked version of  Attic24's pattern (I made larger bobble stitches in the second round). Having eleven colours wasn't going to work out very well, so I found a ball of green yarn that I'd bought sometime in the past and added that to the selection. I divided the colours into three sets of four to make the hexagons, then after I'd made a few I'd swap the colours round and make a few more, to be sure I used up all the yarn equally.

I worked on these on and off until last spring, when I used up most of the yarn, having made 261 motifs. I blocked them in batches then put them all away over the summer. I've been busy all autumn working on a new book (details to come soon!), but when I finished with that just after Christmas, I realised it was a great time to put all those hexagons together.


Weirdly, I really like sewing things together. I know most people hate it, but I find it rather relaxing. (I worked over all the ends of the different rounds as I was making them, but I wish I'd sewn them in now, as they keep poking out. Oh well, I only made this for myself, so it doesn't matter too much.) I decided to sew the blanket with fifteen hexagons wide, seventeen hexagons long, meaning I had a few motifs left over. It took quite a while deciding the order I was going to sew them, trying to mix up the colours in a random-looking way, but I eventually came up with a system that worked.



Of course, once I'd finished, I realised that I hadn't given any thought to a border! I hunted through my stash and found a couple of green yarns that matched with the other colours I'd used, and did a couple of rounds of dc (UK tr) and one round of sc (UK dc) around the edges, and that seemed to work fairly well.



Rather nicely, this blanket that I ended up making by accident matches well with the decor in my sitting room, so I'm very happy with the end result!

Amigurumi Award Pattern

$
0
0

We're right in the middle of awards season now, so if you've got someone in your life that you think deserves an award, I've got just the pattern for you! Some time ago I was asked if I could design a crocheted award statuette, so I decided to give it a go.


It was an interesting challenge. Normally when I make a human figure, it's very stylised, but I wanted to make this more realistic, with a lot more definition. It's still simplified, a bit like a wooden artist's mannequin, with shaping for the body and joints that bend. In fact, you could just make the figure and adapt it if you want a more realistic-looking amigurumi.


The golden figure holds a sword, but you could change this. The pattern includes details on how to make a laurel wreath instead of a sword, or you could make anything you want for the figure to hold, depending on what you're using it for. Sports equipment for a sports award, a bottle of champagne for a celebration, maybe even a crochet hook and a ball of yarn for an epic crocheter!


The pattern is available now on Etsy and Ravelry.

Mother of Dragons

$
0
0
So, who else is eagerly anticipating the final series of Game of Thrones? All the publicity surrounding it has reminded me quite how much I enjoy this show, and love many of the characters, so I was inspired to design some of them in crochet form.


I started with one of my favourites, Daenerys Targaryen. She has a great look, with her white-blonde hair and dark eyebrows, and I decided to make her with the turquiose-blue dress she wears in season three.



 

Of course, I then had to make her three dragons, when they were about the size of large dogs.





I also thought that the costumes she wore once she got to Westeros were great, so I made a variation of the pattern with her wearing a grey coat and red cloak.



It was a bit of a challenge rendering her complicated hairstyle in crochet, but I think I did her various braids justice.



You can buy the patterns now, with the patterns for Daenerys and her dragons sold separately. You can also buy them together at a reduced price here.




Harry Potter Crochet

$
0
0
Big news! I have a new book coming out in October, Harry Potter Crochet. It's produced by the same people who did the previous two Star Wars books and in the same format, so it comes as a kit. There is a book with patterns to make Harry, Ron, Hermione in their school uniforms, with removable robes and scarves; Ginny in her Quidditch uniform and with her broom; Dumbledore, Snape and McGonagall, along with the Sorting Hat; Hagrid, Dobby, Norbert the baby dragon and, of course, Hedwig. To complete the line-up we have He Who Must Not Be Named, Voldemort himself.


The kit includes everything you need to make Harry and Dobby - yarn, eyes and, best of all, a hook shaped like Harry's wand!


I'm a massive Harry Potter fan so I was really excited to be asked to work on this book. Because of the range of character sizes I decided to make them a bit differently to the Star Wars characters. The children are about the same size as most of the SW figures, but the adults are larger, with Hagrid obviously being the largest figure. That allowed me to make Dobby and Hedwig pretty much in scale with Harry, though it would have been impossible to do that with Norbert, so he's closer to being life-sized.


I finished designing the patterns and making all the figures back in January, so I've been waiting for a while to even be able to talk about this. Hopefully it won't seem too long to wait for it to come out in October. It's coming out in the US and you find it on Amazon, though it should also be available in other bookshops and craft stores. It's also available on Amazon UK as an import, so that will be the version with US crochet terms.

Thistle the Highland Spirit

$
0
0

I recently went on holiday to the Scottish Highlands and I decided that I needed to make a little friend to go with me. Using my Small Spirit pattern I crocheted a Highland Spirit that I named Thistle. He's made using a fuzzy alpaca blend yarn that sadly is no longer available, but which can be brushed to make it nice and furry. I used a colour that was a mix of soft blues and greens, to echo the colours in the Scottish countryside, and gave him horns (using the 'curved horns' part of the pattern) that were reminiscent of Highland Cattle.







We had a great holiday, staying in a cottage by a beautiful and remote loch, and Thistle enjoyed himself visiting various places, including Eilean Donan Castle and Leakey's bookshop in Inverness. We also visited lots of film locations, including several for the Harry Potter films, such as the Glenfinnan Viaduct that the Hogwart's Express travels along, a waterfall that features in Goblet of Fire, and the island that was used for Dumbledore's tomb.

 Eilean Donan Castle, which you might recognise from Highlander.

Leakey's bookshop, which is an amazing space just crammed with secondhand books.


 Glenfinnan Viaduct with the Jacobite Train passing over.

 An island on Loch Eilt, the location for Dumbledore's tomb.

Steall Falls in Glen Nevis, used as background to the dragon challenge in Goblet of Fire.

If you want to make your own Small Spirit, with different elements to suit whatever you prefer, you can find the pattern on Etsy or Ravelry.

Mooncake Amigurumi

$
0
0

Earlier this year I asked my brother for ideas for a birthday present for my nephew (he's in his 20s) and he suggested that I could crochet him something. He sent me a photo of Mooncake, a cute little green alien which appears in the animated series Final Space, which I'd never seen. So, of course, I had to check it out (series one is on Netflix) and really enjoyed it. I fell in love with the little alien that flies around in space making funny noises, and who turns out to be much more powerful than his appearance would suggest.


I thought it would be an easy pattern to design, but in fact it took a lot of tweaking to get the shape and proportions right. As with any amigurumi made up mostly of a large shape, it takes a lot of stuffing, much more than you think. You just have to keep adding the stuffing, a bit at a time, until the it really hold its shape.


If you would like to buy the pattern, it's available on Etsy and Ravelry.

The Dark Crystal

$
0
0
I first saw The Dark Crystal on the big screen when it came out in 1982. I was 12, and I was instantly enchanted. I loved the characters and the story, but what particularly caught my attention was the world-building, and all the different creatures that inhabited the world of Thra. I really wanted to make my own strange and wonderful creatures, but I wasn't sure how I would achieve that. It wasn't until I realised that crochet could be used to make things in three dimensions that I started to work on my own creations, and I was very much inspired by Brian Froud, the artist who designed the world of the Dark Crystal.



 Various creatures I've made that have had a bit of inspiration from Brian Froud's creativity.

So, you can imagine how excited I was when I heard that Netflix were making a prequel series to the film - The Dark Crystal: Age of Resistance. A few weeks ago I saw that the magazine SFX was offering readers the chance to go to a talk with Brian Froud at the 'Into Thra' exhibition in London (for free!) and, being lucky enough to live fairly close, I booked it immediately.

Once the show was released I binged it in a few days, so that I would have finished before going to the exhibition. As I started watching I knew that I had to crochet something to take with me, and the obvious choice was Fizzgig, the fuzzy little friend of Kira in the film. His species appears in the prequel, including one with an eyepatch called Baffi. I will write a separate blog post with more details about making him, but suffice to say that I just finished him in time, and so he made the trip up to London with me. My rucksack was rather full, but luckily he's mostly fluff, so he didn't weigh too much!


I had a fun day up in London, visiting the British Library and the National Gallery, and in the early evening I headed to the BFI Southbank. When I arrived I was greeted by sight of the Emperor on his throne, Aughra in a glass case, and staff who were all wearing 'Order of Lesser Service' t-shirts (which I would very much like to have). We all went into a screening room to watch The Crystal Calls, the 'making-of' documentary which is also available on Netflix. I'd already seen it, but it was good to watch it on the big screen. Then Brian Froud came on stage (to loud applause) and was interviewed. He was just as lovely as I'd hoped he'd be, full of lots of interesting information about his work on the film and the show. He joked that after seeing his younger self on the documentary, he was turning into one of his creations!

He talked a little bit about how great it is to create something entirely with puppets, because of the reality they bring. He's not against CGI (and he thought that Jim Henson would have embraced it, as he loved new technology), and said what a useful tool it was on the show, to remove puppeteers in green screen and add more details to the puppets' expressions. However, he did say that CGI characters often lack weight, and that animators would do well to create puppets of their characters to see how they move in the real world.

Lore, an unusally shaped puppet (no spoilers, but if you've seen the show you'll know which character this is) was performed using the Japanese Bunraku style of puppetry, where you can see the puppeteers, but they were removed to give a character with a really unusual way of moving. An interesting mix of an ancient art and modern technology. Brian said that Lore was insprired by the stone tors on Dartmoor, where he lives, and the head was based to some degree on a hamburger!

Brian talked about the fact that Thra has a very different sensibility to our world. Everything is alive - rocks, plant, maybe even clothes. You'll see on the documentary that the people who made the costumes tried to neaten up his designs, not realising that the clothes are supposed to be asymmetrical and organic to a degree. Many of the costumes were made from expensive fabrics, and some of the designers were horrified by the amount of 'aging' he and his wife Wendy were subjecting them to to make them look more like they fit in the world. Luckily the director, Louis Leterrier, was fully behind what they were trying to create or, in this case, destroy.

Brian and Wendy wanted to spend time at the beginning of preparation for the series to make lots of background creatures, which is something they did when they started work on the original film. Unfortunately there wasn't time in the schedule for this and they had to get straight on with the main characters. So they came in at weekends (I think along with their son Toby who also worked on the series) and made little creatures, often out of scraps in the bins, to go in the background of the scenes. However, when Louis saw them he liked some of them enough to put in the foreground!

One fact Brian shared was that when he started designing the Mystics for the original film, Jim Henson suggested he base them on trolls that he drew. The only trouble with this was that any designs he made for the film became the property of the Henson Company, and he didn't want to lose the copyright on creatures he'd already designed, so he gave the Mystics and extra pair of arms, thus making them different enough. The Skeksis also have four arms, but on most of the the second pair has atrophied and is hidden in their clothes, although there's a new Skeksis character in the series that uses all four of his arms.

A question was asked about whether it was his decision for the Gelfling to have a matriarchal society He said that was down to the writers, but that they'd been inspired by the 'Wall of Destiny' he designed for the film which teaches Jen and Kira about the prophecy they are part of. It features a queen figure, which became the All-Maudra in the show. It also inspired the pink Sanctuary Tree which Brian was a bit confused by, until he realised that the image they thought was a tree was actually supposed to be a castle!

All in all Brian talked for about an hour, and he was fascinating to listen to. He mentioned that when people met him, so many said that they had been inspired to do something creative or work in a creative job after watching The Dark Crystal or Labyrinth, and I saw many heads nodding in the theatre. I know it's true for me, and the person I chatted to next to me was working on a stop-motion film, so I think that's very much the case.



 

Various otherworldly beings - over 70 different species were created for the series.

 Brea's journal, paints and paintbrushes.

Brea's journal and another book from the library.

After this, we were able to go and look at the exhibition, which was just crammed with interesting items and puppets from the show. There were displays of various small creatures, props, photos, scale models, and a Podling bottom! Round a corner was the Crystal itself, glowing purple, and then a table set with Skeksis delicacies and with the Chamberlain enjoying them. Round another corner were various tableaux, filled with the plants and animals of Thra, as well as several Podlings, and the  Gelfling stars of the show. It was all a treat for the eyes, and I managed to get a photo of Fizzgig in his natural environment.

 Fizzgig and I enjoying a meal with the Chamberlain. The Gelfling ears were part of the experience!


 Deet

 Brea
 
 Rian


Podlings, and a Podling bottom!

Fizzgig, feeling right at home.



  

Afterwards I picked up a free poster, and a can of Stone-in-the-Wood pale ale! I had a great time that evening, although sadly the exhibition is now over. If you're a fan, and it appears anywhere near you, make sure you go along! In the meantime, I hope you enjoy all the photos, and I'll post more about making Fizzgig in my next post.





Fizzgig Amigurumi

$
0
0

When I started watching The Dark Crystal: Age of Resistance, and knowing that I was going to the Into Thra exhibition in a few days, I just knew I had to crochet something to take along. The obvious choice was to make Fizzgig - I loved him in the original film, and members of his species (which is actually Fizzgig) obviously appeared in the new show, as I kept seeing them in promotional meterial. The only problem was that I had limited time to make him, and I was binge-watching the show in the same time. You'd think that I could make him while I was watching, wouldn't you? I mean, I normally crochet while watching TV, in fact my fingers start getting twitchy if I don't have a project on the go. However, Age of Resistance is such a visual treat that I couldn't risk missing any of it, so I had to crochet in the time I had between the episodes.



The basic technique I used to make Fizzgig was to use loop stitch which I then cut, and fluffed up the yarn using a wire pet brush. I wasn't sure when I started what direction to work in, because I didn't know which direction the fluff would go once it was brushed. I also had the problem that I only had one ball of the yarn I used, and loop stitch uses up a lot of yarn! I didn't bother to make him fluffy at the bottom to save on yarn, and I was really worried that I'd run out as I was making the tail and the feet. Luckily I had just enough, although annoyingly it seems that this colour of yarn is not being produced any more.



I've used the technique of making something furry/hairy by using loop stitch before, but only on much smaller pieces, like the beards for my dwarves, so it was hard to know how well it would work. I was also unsure of how to make the face, but it turned out that just inserting the eyes and sewing on the nose and mouth flattened the fur in that area so the face can be seen. I did think about making a version with an open mouth, or even a puppet version where I'd be able to operate the mouth, like the monster I made a while ago, but I figured that would take longer to get right, so I stuck with a Fizzgig with a closed mouth.


Strictly speaking Fizzgig have four feet, each with four toes, but being limited for time (I was sewing the feet on at 11.00pm the night before I went to the exhibition) mine only has two feet with three toes. Size-wise he ended up larger than I'd planned, nearly lifesize, when I had intended him to be much smaller (maybe large grapefruit size) so he'd be easier to fit in my bag, but that's what happens you make something so fluffy!

A few small issues aside, I'm really pleased with him, and I'm so happy with the way the texture of his fur looks. He's very tactile, and I love stroking and cuddling him. His slightly grumpy face also reminds me of my dog!



Harry Potter Crochet - yarn used

$
0
0


My latest book of patterns, Harry Potter Crochet, has just been released in the US! It comes as part of a kit which includes the yarn to make Harry and Dobby, and a crochet hook shaped like Harry's wand. If you want to watch me opening up the kit, check out this video on YouTube.



To help in finding the right colours of yarn to make the characters, I've made a list of all the yarns I used, and the approximate amounts needed for each figure. I live in the UK, so that's where I get all my yarn from. I use double knitting (DK) weight yarn, equivalent to 3:light weight in the US, and 8 ply in Australia/NZ - there's a yarn thickness guide on Ravelry which is very helpful. (By the way, the yarn I used is not the same as the yarn in the kit. That isn't a particular brand, and was sourced by the publisher separately.)

If you can't get hold of the yarns listed below, you can at least look at them in an online store such as Wool Warehouse or LoveCrochet, which might help you find equivalents closer to home.

I used mostly Hayfield Bonus DK (HBDK) and Stylecraft Special DK (SSDK). Hayfield is a great yarn for making amigurumi (toys worked in the round) as it's quite sturdy and doesn't get squashed by working tightly, which you have to do when you're crocheting like this. Stylecraft is a little lighter and works better for clothes (when you're not working so tightly) as it gives a little bit more drape at this very small scale. I also used it for some hair, but not Hagrid's, as it wasn't very easy to brush out.

Harry Potter
5g pale peach yarn - HBDK Flesh Tone (963).
5g mid grey yarn - HBDK Silver Grey (838).
5g dark grey yarn - HBDK Dark Grey Mix (790).
5g black yarn - HBDK Black (965).
5g dark brown yarn - SSDK Dark Brown (1004).
Small amount of white yarn - HBDK White (961).
Small amount of maroon yarn - HBDK Claret (841).
Small amount of yellow yarn - HBDK Sunflower (978).

Hermione Granger
10g pale peach yarn - HBDK Flesh Tone (963).
5g mid grey yarn - HBDK Silver Grey (838).
5g dark grey yarn - HBDK Dark Grey Mix (790).
5g black yarn - HBDK Black (965).
10g  light brown yarn - yarn used now unavailable, try HBDK Walnut (927) or Stylecraft Life DK Bark (2448).
Small amount of white yarn - HBDK White (961).
Small amount of maroon yarn - HBDK Claret (841).
Small amount of yellow yarn - HBDK Sunflower (978).

Ron Weasley
All the same as Harry, apart from yarn for hair:
5g russet yarn - SSDK Copper (1029).

Student robe and Scarf Pattern
10g black yarn - SSDK Black (1002).
5g maroon yarn - HBDK Claret (841).
5g yellow yarn - HBDK Sunflower (978).

Dobby
15g pale peach yarn - HBDK Flesh Tone (963).
10g mid grey yarn - HBDK Silver Grey (838).
Small amount of black yarn - HBDK Black (965).

Rubeus Hagrid
15g pale peach yarn - HBDK Flesh Tone (963).
10g medium brown yarn - HBDK Chocolate (947).
10g maroon yarn - HBDK Claret (841).
10g black yarn - HBDK Black (965).
25g dark brown yarn - Robin DK Brown (51).
25g light brown yarn - yarn used now unavailable, try HBDK Walnut (927) or Stylecraft Life DK Bark (2448).
Small amount of silver grey yarn (for belt buckle) - HBDK Silver Grey (838).
Small amount of beige yarn (for buttons) - HBDK Walnut (927).

Norbert The Dragon
25g green yarn - HBDK Orchard (904).

Albus Dumbledore
10g pale peach yarn - HBDK Flesh Tone (963).
20g purple yarn - HBDK Velvet Plum (906).
20g magenta yarn - SSDK Plum (1061).
5g black yarn - SSDK Black (1002).
10g white yarn - HBDK White (961).

Minerva McGonagall
10g pale peach yarn - HBDK Flesh Tone (963).
30g black yarn - HBDK Black (965).
15g dark green yarn - SSDK Bottle (1009).
10g beige yarn - HBDK Walnut (927).

Sorting Hat
15g medium brown yarn - HBDK Chocolate (947).
Small amount of black yarn - HBDK Black (965).

Voldemort
10g pale peach yarn - HBDK Flesh Tone (963).
35g black yarn - HBDK Black (965) for body (optional 15g SSDK Black (1002) for the robe only).

Severus Snape
10g pale peach yarn - HBDK Flesh Tone (963).
20g dark blue yarn - HBDK Navy (971).
10g black yarn - HBDK Black (965).
Small amount of white yarn- HBDK White (961).

Ginny Weasley
5g pale peach yarn - HBDK Flesh Tone (963).
5g red yarn - HBDK Classic Red (833).
5g medium brown yarn - HBDK Chocolate (947).
5g black yarn - HBDK Black (965).
10g russet yarn - SSDK Copper (1029).
Small amount of yellow yarn - HBDK Sunflower (978).

Broomstick
2g light brown yarn - yarn used now unavailable, try Robin Mink (0143) or Stylecraft Life DK Bark (2448).
Small amount of beige yarn - HBDK Walnut (927).
Small amount of grey yarn - HBDK Silver Grey (838).

Hedwig
10g white yarn - HBDK White (961).
Small amount of black yarn - HBDK Black (965).


Little Monster Finger Puppets - free crochet pattern

$
0
0

Here's a little treat for Halloween that's quick and simple to crochet.


You will need:
Small amount of yarn for the body, any colour you like (I think green or purple looks good).
Small amount of red yarn for the mouth and eyes.
Small amount of black yarn for eyes.
Tapestry needle.
3.5mm crochet hook (US E hook).

Finished size: approximately 4 cm/1.5” tall.

Abbreviations:
ch = chain
st = stitch or stitches
ss = slipstitch
sc = single crochet (US), double crochet (UK)
dc = double crochet (US), treble crochet (UK)
hdc = half double crochet (US), half treble crochet (UK)
BLO = back loop only
FLO = front loop only
tog = together
sc2tog = decrease by working two sc together
bob = bobble (see special stitch instructions)
FO = fasten off

General instructions:
Work in rounds unless otherwise stated and do not join rounds unless told to. Use a stitch marker to mark the start of a round - a small piece of different coloured yarn placed under the stitch at the start of the round will do. To start a round, you can use the magic ring method, but I prefer (ch2, work 6 sc into 1st ch). If you work the 6 sc over the tail of yarn as well you can use that to pull the hole tight. You can find a detailed tutorial on how to do this here on my blog.

Work through both loops of stitches unless otherwise indicated.

Special stitch instructions:
3 dc bob: bobble stitch for nose. YOH (yarn over hook), insert hook into next stitch, YOH and pull through loop, YOH, pull through 2 loops, *YOH, insert hook into same stitch, YOH and pull through loop, YOH, pull through 2 loops, repeat once from*, YOH, pull through all 4 loops on hook.


Start with yarn for body.
Round 1: ch 2, work 6 sc into 1st ch - 6 st.
Round 2: 2 sc in each st around - 12 st.
Round 3: [2 sc in next st, sc in next 3 st] 3 times – 15 st.
Round 4: sc in each st around - 15 st.
Round 5: sc in next 6 st, 3 dc bob in next st, sc in next 8 st – 15 st.
Round 6: sc in next 4 st, [FLO: sc in next st, 2 hdc in next st, hdc in next 2 st, 2 hdc in next st, sc in next st], sc in next 5 st – 17 st.
Round 7: sc in next 4 st, change to red yarn, [work in back loops remaining from working in front loops in previous round: hdc in next 6 st], change to body yarn, sc in next 5 st – 15 st.
Cut red yarn, leaving a length to sew the eyes. Sew 4-5 lines vertically over rounds 3 and 4 on either side of the nose. Use black yarn to sew a dot in the centre of each eye. Secure ends of yarn.
Round 8: sc in next 5 st, [FLO: sc in next st, 2 hdc in next st, hdc in next st, 2 hdc in next st, sc in next st], sc in next 5 st – 17 st.
Round 9: sc in next 5 st, [work in back loops remaining from working in front loops in previous round: hdc in next 5 st], sc in next 5 st – 15 st.
Round 10: sc in next 3 st, [arm: ss into next st, ch 7, turn, ss into next 2 ch, (ch 3, turn, ss in next 2 ch) 2 times, ss into next 4 ch, ss back into original st on round], sc in next 7 st, [arm], sc in next 3 st - 15 st.
Round 11: sc in each st around (work into the first ss used to make each arm, not the final ss) - 15 st.
Round 12: sc in each st around - 15 st.
Ss in next st, FO and weave in end of yarn.

Stick it on your finger and have some monstrous fun!




Baby Yoda

$
0
0
So, who's watching the new Star Wars series, The Mandalorian? Not me unfortunately, because it's not available in the UK, but without even looking for spoilers I can't help but see images of the adorable baby Yoda that features in the show. It's not actually Yoda as a baby, but a member of his species, which doesn't have a name. The first thing I noticed when I looked at pictures of the cute little baby was that it looked a lot like my mini amigurumi of Yoda which appears in the Star Wars Crochet Kit and which is a small and very simplified version of Yoda.


So, I decided to try adapting that pattern a little to make it more like the baby in the show. If you have the Star Wars Crochet Kit then you can use these variations and make yourself your own tiny Baby Yoda. (Please note, I'm using US stitch names).

Follow the instructions to make the Head and Body as they are in the book, but use 9mm safety eyes for that big-eyed baby look.
After making the head change to dark beige yarn for the body on round 11.
When you get to round 20 don't change to green yarn and don't make the feet, just work 27 sc around.

Baby Yoda's ears are proportionally larger, so make them as follows:
Rnd 1: ch 2, work 6 sc into first ch - 6 st.
Rnd 2: 2 sc in each st around - 12 st.
Rnd 3: 2 sc in each of next 2 st, (hdc, dc) in next st, ch 1, (dc, hdc) in next st, ss in next st - end round here and FO.
Follow the rest of the instructions in the book to shape and attach the ears.


Start making the arms as described in the book, then after round 2 change to light beige yarn and work 6 x 2dc bobbles around. Change to dark beige yarn and work rounds 3 - 6 as in the book, miss round 7 and work round 8 as described.

To make the cowl neck collar using light beige yarn:
Ch 26.
Row 1: miss ch next to hook, sc in next 25 ch, ch 1, turn.
Row 2: sc in next 25 st, ch 1, turn.
Row 3: sc in next 25 st, FO.
Pin around the neck and top of the arms with the starting chain at the top. Overlap at the front as shown then sew in place. Fold over and secure the front with a couple of stitches.



I hope you enjoy making your own little Baby Yoda!

Jon Snow and Ghost

$
0
0

While the final series of Game of Thrones was showing last year, I started working on these patterns, but various things conspired to mean that I hadn't got them finally finished and written up until now! I know series 8 got some mixed reviews, but I enjoyed it, and I thought the show as a whole was great. Jon Snow was always one of my favourite characters, and had a fascinating journey thoughout the show. I've designed him with a couple of different looks - the loose curly hair and mostly black clothes of the earlier seasons when he was in the Nightwatch, and the longer, pulled back hair and neck armour he wears in later seasons. The pattern also includes details to make a cloak with a fur collar for either version.

 


Of course, I had to make a pattern for his white direwolf companion Ghost. I thought it would also be nice to design two more versions with two-coloured coats so people can make a variety of different direwolves (or wolves - there's no difference apart from the scale with the Jon Snow figure). Wolves come in a variety of different colours - brown, black, reddish, grey or a mixture - so you can choose whatever yarn suits you best. If you can find a mottled one, that would probably give a really good effect.






Both patterns are available on Etsy (Jon Snow pattern here, Wolf and Direwolf pattern here) and you can buy them together at a reduced price here. You can also find them on my Ravelry page here.

Fizzgig Amigurumi Pattern

$
0
0

After I saw The Dark Crystal for the first time as a child I totally fell in love with Kira's adorable and occasionally grumpy pet Fizzgig. Who wouldn't love that ball of fluff? And then, when the prequel series Age of Resistance was released last year, I fell in love with the whole world of Thra all over again, with its multiple Fizzgigs in different colours, including one with an eyepatch!. I've already posted about making a Fizzgig for myself (here) and the trip I took him on to see The Dark Crystal exhibition in London (here).



After that I decided to write up the pattern but I immediately encountered a problem. Fizzgig's fluffy fur is made by working the loop stitch, cutting the loops and them brushing with a wire pet brush to separate the strands. The yarn I used, which had a mix of light brown colours and a loose twist, was perfect for this, but was unfortunately not being made any more. I then had to experiment with other yarns and found that Hayfield Bonus DK and Robin DK brushed out the right way, and so I chose different shades of light brown, beige, honey and gold yarn, and used two colours alternately to give the right look. I found that Stylecraft Special DK does not brush out well, but I would recommend that anyone who wants to make a Fizzgig tests the yarn they've chosen. I've used 100% acrylic yarn, which works fine, and acrylic yarn mixed with wool or alpaca should work, as I think would 100% wool or alpaca. Cotton yarn would not brush out in the same way.


Fizzgig have four feet...

...which you can just see peeping out under their fur.

They also have long, fluffy tails.

Luckily mixing two yarns together worked, and gave a nice result. I tweaked my original pattern a bit and made it slightly taller, as well as giving Fizzgig the correct number of feet (four). I decided against trying to make a version with an open mouth, as this would probably have to be a puppet, and I was more keen to create a solid toy.

Large and small versions.

Brushing the yarn to make it fluffy takes a fair bit of work, you need to sit down with a fun TV show or podcast and just work at gradually brushing a few strands at a time. Because of that I designed a smaller version that would be quicker to make, and still be just as cute. The larger version is about 22cm/8.5" tall, the smaller one is about 16cm/6.5" tall, and the pattern includes details to make eyepatches for both sizes of Fizzgig. You can buy the pattern on Etsy or Ravelry.


Ahsoka Tano Amigurumi Pattern

$
0
0

My latest pattern, to make Ahsoka Tano from The Clone Wars, is now available to buy in my Etsy and Ravelry shops. The Clone Wars series has been responsible for some great serialised story-telling in the Star Wars universe, and for creating a character in Ahsoka who has become a fan favourite. She's introduced as Anakin's young padawan and is enthusiastic and honest, with a good moral compass. She's not perfect, she makes mistakes, but she has great character development over the series, and goes on to appear in Star Wars Rebels as well.



Ahsoka is a Togruta, with orange skin and blue and white head parts, consisting of two pointed montrals at the top and three tails, or lekku, at the bottom. Creating this at a relatively small scale (she's only 11 cm/4.5” tall) was quite the challenge, and it took quite a few attempts to get it right. Because of the complicated structure of the head piece I've added lots of photos into the pattern to explain each stage clearly, so I hope it won't be too difficult for people to follow.


I based this pattern on her look at the start of The Clone Wars, but it would be easy to alter it slightly to look like the outfit she wears from series 3. To make her with the dress and leggings rather than top, skirt and leggings, just crochet the orange skin section in the middle in brown instead, and use two chains of russet brown/dark orange yarn to make her belt. You can also make her an extra lightsaber. Her later grey/blue costume would just need changes in colour for the different parts, and white lightsabers.


I've listed the yarn I used to make her at the end of this post: Star Wars Crochet - yarn used. I hope those of you who are fans of Ahsoka will enjoy making this mini version of her!


Fuzzy Troll Amigurumi

$
0
0

Whenever I go into a yarn store, I can't help but be tempted by those fuzzy fun fur-type yarns, they look so fluffy and tactile. The sort of yarns I'm talking about, sometimes called eyelash yarn, have a thread base with strands sticking out from this. Back when I had just started making amigurumi I bought quite a lot of them, in all sorts of different colours, and then I had to work out what to do with them. I ended up using them to make Fuzzy Trolls for my children, but until now I hadn't got round to turning this design into a pattern.

These trolls are friendly little creatures, who love nothing more than relaxing in a meadow filled with wildflowers. They are brightly coloured, with horns and long fuzzy-ended tails, and the pattern gives you all the details you need to make either a large (15cm/6" tall) or small (12cm/5" tall) fuzzy troll.






My new pattern is available on Etsy and Ravelry, and because using fuzzy yarn can be a bit challenging, I have created a series of videos to take you through the whole process of making a Fuzzy Troll, which you can find on this playlist on my YouTube channel. 
Here is the first video, which tells you how to choose the fuzzy yarn you need.

Along with the pattern, you can work your way through all the videos in order and they will guide you through everything you need to do, or you can just check out any elements that you are unsure of.

This is my first time making video crochet tutorials, so I hope you find them helpful. They show a lot of tips and tricks as to how to make various elements of amigurumi, so you might find it useful to watch them, even if you're not making a troll. In the future I'd like to make some more, perhaps showing how to make some of my small free patterns in detail, hopefully that will be helpful to anyone who's new to making amigurumi.


Tree Folk and Fungus Folk Amigurumi Pattern

$
0
0

I love my walk every day through local fields and woods, getting to see beautiful trees and spot toadstools popping up through the earth at this time of year. These two patterns celebrate, in cute amigurumi form, my fondness for these elements of nature. 



These two types of creature are not in scale with each other - true Tree Folk are much more mighty than these little fellows, whereas Fungus Folk are small and unexpected, brightening the woods with their colourful caps.

If you need a little friendly Tree Folk or Fungus Folk in your life, this pattern has all the details you need to make them, with lots of photos to illustrate the more complicated elements. Depending on the yarn you use (I used DK weight, but slightly thinner or thicker yarn will work just fine) the Tree Folk will end up about 12cm/5" tall, and the Fungus Folk will be 10cm/4" tall.

For the Tree Folk you can use a range of yarn colours: different greens for the crown (variegated colours look good) or russet if you want an autumnal tree, and various browns and grey for the trunk. For the Fungu Folk the instantly recognisable red with white spots of the Amanita muscaria or fly agaric is a great choice, but you can make it in any colour, or to look like any mushroom you like.

Find the pattern in my Etsy shop, or on Ravelry.


Article 0

$
0
0

 

Super-quick Snake - Free Crochet Pattern



These little snakes are quick and easy to crochet, they don't need stuffing and there's hardly any sewing to finish them off. They naturally curl around your fingers and are great for anyone who loves snakes. They would also make cool and creepy decorations for Halloween.




You will need:

Small amounts of 2 different colours of DK weight yarn to work together - green and black, or green and yellow make nice snake colours mixed together (thinner or thicker yarn is fine, just use a thinner or thicker hook).

Small amount of red yarn for the mouth and eyes.

Tapestry needle.

4.5mm crochet hook.

Finished size: approximately 18 cm/7” long.


Abbreviations:

ch = chain

st = stitch or stitches

ss = slipstitch

dc = double crochet (US), treble crochet (UK)

hdc = half double crochet (US), half treble crochet (UK)

tog = together

dc2tog = decrease by working two dc together (see special stitch instructions)

FO = fasten off


General instructions:

This pattern is written using US crochet terms. For the UK equivalents, see abbreviations list.

The head is worked in rounds and is not joined. To start a round, you can use the magic ring method, but I prefer to work into the  1st chain stitch, working over the tail of yarn and using that to pull the hole tight.

Special stitch instructions:

Dc2tog: YOH (yarn over hook), insert hook into next stitch, YOH and pull through loop, YOH, pull through 2 loops, YOH, insert hook into next stitch, YOH and pull through loop, YOH, pull through 2 loops, YOH, pull through all 3 loops on hook.


Starting at the head, holding both strands of yarn together:

Round 1: ch 3, work 8 dc into 1st ch - 8 st.

Round 2:dc2tog 4 times - 4 st.

Ch 21, sc into 2nd ch from hook, sc into next ch, 2 hdc into next 18 ch.

Ss into next st on head, FO leaving some yarn.

Using the red yarn sew one eye with three short lines. Take the yarn out of the small hole where you started the head and make a tiny stitch to secure it. Make a loop for the tongue and secure it with another tiny stitch, then sew the other eye and secure the end of the yarn. Cut the loop of yarn to look like a forked tongue (if it frays put a tiny bit of glue on the strands). Use the ends of yarn from the snake’s body to sew up the back of its head and weave in any ends.



Yeti and Bigfoot pattern - new method to make arms

$
0
0

I recently had a message from someone who was having problems making the arms for the Yeti from my Yeti and Bigfoot pattern, They are made from the fingers upwards and the technique can be quite fiddly to get to grips with. Otherwise the pattern is quite a straightforward one for people fairly new to making amigurumi, so I thought it would be good to try to make the arms easier to crochet. 

So, the pattern now includes the additional information on how to make the arms from the top down, which makes the fingers much easier to crochet. I still slightly prefer the way the original method looks, but there's not very much in it. If you've already bought the pattern you should be able to download it again and get the new version of the pattern. Contact me on the site where you bought it if you have any problems with this.


The new versions of the hands, small at top, big at bottom.





Chubby Bunnies - free patterns

$
0
0

It's a week to go until Easter, and I've been working on some cute Chubby Bunnies and Baby Chubby Bunnies. You can find the free patterns on my Ravelry page and I've made a few different types to show you some options.




You can make them in natural rabbit colours, or use colourful or striped yarn for a fun look. Crochet the tails, or make a great big pom-pom instead. The Baby Chubby Bunnies are so quick and easy to make, you could crochet lots of them and use them in an Easter Egg hunt as an alternative to chocolate.


I hope you have fun with the patterns, let me know if you make any!



All About The Mandalorian Crochet Kit

$
0
0




My latest book and kit is out now, with twelve characters from The Mandalorian for you to make. In the book you'll find the patterns for:

The Mandalorianhimself, or Mando, with the outfit he wears at the start of series 1 (during the two series so far he gradually picks up new armour).

Grogu (Baby Yoda) in his floating pram - full disclosure, despite the photo on the front of the book, the crochet pram does not actually float!

Cara Dune.



Greef Karga
.


Moff Gideon, with the Darksaber.



Kuiil
.

IG-11.

Grogu (Baby Yoda) at a larger scale. The first Grogu is tiny, and roughly in scale with the other characters. This version is larger, about 3" tall, compared to the humans who are generally about 4" tall.



Mudhorn, which is not in scale with the other figures but is still quite large at about 6" long.



Offworld Jawa, which as well as wearing a grey rather than brown robe, has a slightly different hood compared to the Jawa pattern you'll find in Star Wars Even More Crochet.



Bo-Katan Kryze, who comes with the option to make her with or without her helmet.

Ahsoka Tano, who is obviously the older version of the character than the one seen in The Clone Wars cartoons, with two white lightsabers.


 


There were some interesting challenges in coming up with these designs. It seemed like Mando would be just a variation on Boba Fett, but the fact that his helmet is all silver made it much harder to define the shape in a small crochet form. I had to try quite a few variations before I was satisfied, and it must be said that this is not an easy pattern for a beginner to amigurumi. It's included as one of the patterns in the kit, which makes sense given that he's the main character in the show, but there are a lot of colour changes and fiddly elements to the pattern. The other pattern in the kit, the smaller Grogu in his pram, is a bit easier, but it was also a challenge to make such a small character and still manage to include enough details to make it work.




I was very happy with Kuill, who was one of my favourite characters. He's a bit smaller than the human characters so I worried that I wouldn't be able to include all the details I needed to make him work, but he came out just how I wanted the first time I made him. I really wasn't sure if IG-11 would work in this format at all - it's a tall, thin, spindly robot, and these are cute, slightly chubby amigurumi versions of characters - but in the end I think this version is fun, recognisable but cute.




I started work on this in the early autumn of 2020, before series 2 of The Mandalorian had been released, so I wasn't told about all the characters I'd have to make until they'd appeared in the show. I was very happy when Ahsoka and Bo-Katan appeared, they're both colourful and interesting to look at, so they make great amigurumi. I thought I had a head start on Ahsoka since I'd already made the young version we first see at the beginning of The Clone Wars, but it was surprising how many details had to be altered, and since her head piece is so complicated it took a while to work out all the changes. With Bo-Katan I thought I knew how to make her helmet, since I'd already done Mando's, but the shape and all the details are quite different, so it took a while to get it just right. I thought it would be fun to see her without her helmet too, so I'm glad I asked to include that version too.





I hope that if you get hold of this book that you enjoy making the various characters. To help you find the right colours of yarn to make the characters, I've made a list below of all the yarns I used, and the amounts needed for each figure. I've also noted at the bottom of this post any errors in the book that I've noticed; if you come across any yourself, let me know. I work hard to make sure there aren't any errors, but some always manage to slip through!


Yarn List(approximate amounts):

I live in the UK, so that's where I get all my yarn from. I use double knitting (DK) weight yarn, equivalent to 3:light weight in the US, and 8 ply in Australia/NZ - there's a yarn thickness guide on Ravelrywhich is very helpful. (By the way, the yarn I used is not the same as the yarn in the kit. That isn't a particular brand, and was sourced by the publisher separately).

If you can't get hold of the yarns listed below, you can at least look at them in online stores such as Wool Warehouse or LoveCrafts, which might help you find equivalents closer to home.

I used mostly Hayfield Bonus DK (HBDK) and Robin DK (RDK). Hayfield is a great yarn for making amigurumi (toys worked in the round) as it's quite sturdy and doesn't get squashed by working tightly, which you have to do when you're crocheting like this. Unfortunately, Robin yarn is no longer available, so I have included some alternatives in Stylecraft Special DK (SSDK). Stylecraft has a great range of colours but is a little lighter in weight so you might find that parts come out a little smaller when you use it.
 
The Mandalorian:
5g light grey yarn - HBDK Light Grey Mix (814).
5g black yarn - HBDK Black (965).
10g dark grey yarn - HBDK Slate Grey (633).
5g mid brown yarn - HBDK Chocolate (947).
5g dark brown yarn - RDK Brown (051), alternative SSDK Dark Brown (1004).
Small amount of yellow yarn - HBDK Sunflower (978).
Small amount of beige yarn - HBDK Walnut (927).
Small amount of light beige yarn - HBDK Oatmeal (964).
Small amount of blue yarn - HBDK Denim (994).
 
Grogu in pram:
5g green yarn - HBDK Grass (825).
10g light beige yarn - HBDK Oatmeal (964).
10g light grey yarn - HBDK Light Grey Mix (814).
 
Cara Dune:
10g pale peach yarn - HBDK Biscuit (963).
10g teal yarn - HBDK Petrol (829).
5g dark teal yarn - HBDK Teal (691).
5g dark grey yarn - HBDK Slate Grey (633).
10g black yarn - HBDK Black (965).
10g dark brown yarn - RDK Brown (051), alternative SSDK Dark Brown (1004).
Small amount of light grey yarn - HBDK Light Grey Mix (814).
 
Greef Karga:
5g black yarn - HBDK Black (965).
10g light brown yarn - HBDK Walnut (927).
10g mid brown yarn - HBDK Chocolate (947).
10g dark brown yarn - RDK Brown (051), alternative SSDK Dark Brown (1004).
5g golden brown yarn - RDK Honey (129), alternative SSDK Camel (1420).
 
Moff Gideon:
20g black yarn - HBDK Black (965).
5g light brown yarn - HBDK Walnut (927).
5g red yarn - HBDK Soft Red (617).
Small amount of white yarn - HBDK White (961).
Small amount of dark grey yarn - HBDK Slate Grey (633).
 
Kuiil:
5g pale peach yarn - HBDK Biscuit (963).
5g mid brown yarn - HBDK Chocolate (947).
5g dark brown yarn - RDK Brown (051), alternative SSDK Dark Brown (1004).
5g khaki green yarn - HBDK Olive Green (634).
5g light brown yarn - HBDK Walnut (927) or Taupe (601).
Small amount of silver grey yarn - HBDK Light Grey Mix (814).
Small amount of black yarn - HBDK Black (965).
 
IG-11:
15g grey yarn - HBDK Dark Grey Mix (790).
5g black yarn - HBDK Black (965).
Small amount of red yarn - HBDK Signal Red (977).
 
Grogu (larger version):
10g green yarn - HBDK Grass (825).
15g light beige yarn - HBDK Oatmeal (964).
 
Mudhorn:
30g mid brown yarn - HBDK Chocolate (947).
10g dark beige yarn - HBDK Walnut (927).
 
Offworld Jawa:
5g black yarn - HBDK Black (965).
15g dark grey yarn - HBDK Slate Grey (633).
Small amount of dark brown yarn - HBDK Chocolate (947).
 
Bo-Katan Kryze:
10g pale peach yarn - HBDK Biscuit (963).
10g dark grey yarn - HBDK Slate Grey (633).
10g light grey yarn - HBDK Light Grey Mix (814).
10g russet yarn - HBDK Fox (779).
15g turquoise yarn - HBDK Turquoise (998).
5g black yarn - HBDK Black (965).
10g mid brown yarn - HBDK Chocolate (947).
5g white yarn - HBDK White (961).
 
Ahsoka Tano: 
10g russet yarn - HBDK Fox (779).
10g black yarn - HBDK Black (965).
5g mid brown yarn - HBDK Chocolate (947).
10g dark grey yarn - HBDK Slate Grey (633).
10g blue yarn - HBDK Denim (994).
10g white yarn - HBDK White (961).
5g light grey yarn - HBDK Light Grey Mix (814).
Small amount of maroon yarn - HBDK Claret (841).
 
*Errata:
There is a mistake in the pattern for IG-11, page 47. Round 3 should read:
Rnd 3: [2 sc in next st, sc in next 2 st] 2 times – 8 st.
 


Viewing all 126 articles
Browse latest View live